1 Gallon USC 10 Universal Urethane Automotive Clearcoat for Cars - 4.2 VOC

Description

Listing Template 2018
Home
About Us
Shipping
Returns
View Feedback
Contact Us
1 Gallon USC 10 Universal Urethane Automotive Clearcoat for Cars - 4.2 VOC
Give your projects a great finish and gloss with the USC 10 Universal Urethane Clearcoat.
Why is clearcoat necessary?
Clearcoat can provide your vehicle with the enhanced durability and an excellent glossy finish for the ultimate buff look. The clearcoat on your vehicle provides excellent ultraviolet rays protection. Sun rays are the primary cause for paint fades. Once the clearcoat has been applied, you can easily buff the shallow surface defects on your automobiles without harm to the paint. Automobile painters believe that clearcoat ensures easy maintenance and repair work on your vehicle.
How to best apply clearcoat?
Clearcoat should be applied only after the color paint is down. You can apply two coats, the first coat to flash to hand-stick before applying second coat. You can even opt for wet-on-wet ‘limited flash’ application by allowing a 2-5 minute flash between coats. Adjust the air pressure to HVLP 8 -10 psi and Conventional 50-60 psi.
About USC 10 Universal Urethane Clearcoat
The USC 10 Universal Urethane Clearcoat is a high solids clearcoat that is designed specifically for multi-panel and spot repairs. The characteristics of the clearcoat are that it provides excellent leveling, gloss, blending and buffing properties. It works well on air dry and force air dry environments. It flows out to a smooth and durable finish and provides excellent gloss. Clearcoat is available in one gallon cans with hardeners available in quart cans in 3 different speeds.
Mix Ratio
Mix the one-gallon clearcoat with activator in the ratio of 4:1
You can apply the clearcoat over basecoats or cured single stage enamels
ReCoat
Allow clearcoat to dry overnight, then scuff with 1000 grit and reapply clearcoat
Drying
Air Dry Times at 70°F
Dust Free: 15 minutes
To Deliver: 4-6 hours
Force Dry: 15 minutes @120°F surface temperature
Buffing
After 24 hours of air dry, or cool down from force dry, you may sand with 1500 or finer grit paper if necessary. Buff with appropriate compound and always remember that it is easiest to buff if done within the first 48 hours of application.
ABTM Part Number: USC-10-1
This item can only ship by ground within the Continental US.
Auto Body Toolmart has been serving the Automotive Industry for over 30 years. Buy with confidence.
About Us
Based in United States, autobodytoolmart has been an eBay member since Jul 03, 2000
Feedback
We will always help you to have a 100% positive happy buying experience. Contact us if you are unhappy about any aspect of your purchase from us. We only want five star feedback from you so buy with confidence.
View Our Categories