Emulsion Scoop Coater Silk Screen Printing Stainless steel Screen Printing Tool

Description

Stainless Steel Emulsion Scoop Coater
Features: 1)The sizing blade is smooth and does not hang the net. 2)The solder joint is tight and does not leak coater glue. 3)The steel is thick enough, with fine polishing. 4)Comfortable feel, easy to use, long - term use without deformation, durable. How to choose length: For example: If the inner diameter of the mesh frame is 30cm, It is recommended to choose a Coater that is 3-5 cm smaller. It is not recommended to use a 29 or 29.5cm sizing device, because the glue is easy to touch the frame caused by the pause caused by the uneven gluing, Scratch the mesh left and right once, then scratch a few more times in the middle, remove the excess photosensitive glue, and make the glue surface smooth and uniform.
Note:
All Scoop Coater is polished well before shipping, but it is highly recommend that customer could polish one more time with sandpaper before using.