SprayMax 3680061, 2K Urethane Clear Coat, Aerosol

Description

SprayMax, 2 Part (2K) Urethane Aerosol Clear Coat
SprayMax now offers a 2 part (2K) Urethane Aerosol Clear Coat. This 2k urethane Clear Coat spray has a much higher U.V. and weather resistance than any standard aerosol clearcoat on the market today. Contrary to standard aerosol paint technology, Spray Max uses an innovative nozzle technology in combination with a new propellant technology. Spray Max offers a higher yield, a faster spray time, and a wider more even spray pattern than your standard conventional aerosol spraycan.
Spray Max 2K Urethane Clear Coat Benefits:
Professional paint results like a spray-gun
No paint mixing
No cleaning of the spray-gun
No solvent for cleaning
No compressor
Less overspray
Salesman Notes
: 2K SprayMax Urethane Aerosol Clear Coat works much like a conventional spraygun. It has high transfer efficiency, and great atomization. In my opinion, SprayMax 2K Clear Coat is the best clear coat in a spray can.
How to Use:
First shake for 2 minutes vigorously before activating.
To activate:
Simple take the red button from the cap and attach it to the pin on the bottom of the can. Put the top of the can on stable ground and push the red button firmly and press the pin into the can. Shake again for two minutes to ensure activator is thoroughly mix with clearcoat. After activated, this product will last approximately 24 hours.
Product Characteristics:
Spray Max 2 part Aerosol Clear Coat has excellent adhesion to basecoat and cured lacquer and enamel finishes.
Preparation:
Allow basecoat paints at least 30 minutes dry time prior to using the 2K Spray Max Urethane Aerosol Clear Coat. Apply 2-3 coats of aerosol clearcoat. Allow 5-10 minutes between coats. After allowing approximately 24 hours dry time, It may been polished by hand or machine.